Basic Info.
HS Code
85351000
Production Capacity
100000
Product Description
Splice full traction ACSR-AAAC No. 2 to 2 AWG
Splice full traction ACSR-AAAC No. 4 AWG
variety of connector products to fit most distribution applications. Installation methods may be automatic, bolted, or compression to connect various sizes and types of popular conductors (aluminum, copper, or bi-metallic) and support wires.
Full pre-siled traction joint for driver No.
2
CLAMP P/G ALUMINIUM/ALUMINIUM 100/100 MM2
Splice full traction ACSR-AAAC No. 4 AWG
| 4 | Material name | Full traction joint for driver ACSR -AAAC No. 2 to 2 AWG | |
| 5 | Splicing standards | ANSI C119.4, ASTM D 566 | |
| 6 | ISO Certificate | 9001 or recent | |
| 7 | Splice class | TO | |
| 8 | Raw material of the driver | Aluminium alloy | |
| 9 | Design of the splice to full traction | The tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filled with inhibitor compound. | |
| 10 | Splice fabrication | The joints must be designed with the materials of the best quality, allowing to fulfill their function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee the resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion. | |
| 11 | Finish | The joint shall not present cracks, cavities, welds superficial or internal defects, or any other that may affect its correct functioning. | |
| 12 | Calibers of drivers | ACSR 2 | |
| 13 | Diameter of the driver | mm | 8.05 |
| 14 | Splice length | mm | 300 to 320 |
| 15 | Central diameter of the splice | mm | 25 |
| 16 | Maximum tension | dAN | 1150 |
| 17 | Color | Red | |
| 18 | The splice nozzles must present | a sealing cap that prevents the entry of moisture and external agents into its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining inhibitory fat inside the splice during transport and storage | |
| 19 | DN-DS certificate | Attach acceptance certificate and homologation | |
| 20 | Identification Mark | You must present the engraving on the body of the material, name of the manufacturer, measure of the driver, tension, minimum pressure of the press | |
| 21 | Packaging | Pre-insulated compression sleeve splices must be packed in a highly resistant cardboard box in order to protect in the transportation and handling of the material |
| 4 | Material name | Full traction joint for driver ACSR -AAAC Nº4 AWG | |
| 5 | Splicing standards | ANSI C119.4, ASTM D 566 | |
| 6 | ISO Certificate | 9001 or recent | |
| 7 | DN-DS certificate | Attach certificate of acceptance and approval | |
| 8 | Splice class | TO | |
| 9 | Raw material of the driver | Aluminium alloy | |
| 10 | Design of the splice to full traction | The tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filled with inhibitor compound. | |
| 11 | Splice fabrication | The joints must be designed with the materials of the best quality, allowing to fulfill their function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee the resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion. | |
| 12 | Finish | The joint shall not present cracks, cavities, welds superficial or internal defects, or any other that may affect its correct functioning. | |
| 13 | Calibers of drivers | ACSR 4 | |
| 14 | Diameter of the driver | mm | 5.80 to 6.45 |
| 15 | Splice length | mm | 260 |
| 16 | Central diameter of the splice | mm | 23 |
| 17 | Maximum tension | dAN | 1150 |
| 18 | Color | Orange | |
| 19 | The splice nozzles must present | a sealing cap that prevents the entry of moisture and external agents into its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining inhibitory fat inside the splice during transport and storage | |
| 20 | Identification Mark | You must present the engraving on the body of the material, name of the manufacturer, measure of the driver, tension, minimum pressure of the press | |
| 21 | Packaging | Pre-insulated compression sleeve splices must be packed in a highly resistant cardboard box in order to protect in the transportation and handling of the material |
Full pre-siled traction joint for driver No.
| 4 | Material name | Pre-insulated compression sleeve coupling 4/0 to 4/0 AWG | |
| 5 | Raw material of the driver | Tube or solid bar made of aluminum alloy | |
| 6 | Insulation material | Thermoplastic resistant to compression shall be such that it must guarantee the values of dielectric strength | |
| 7 | Pre-insulated compression splice design | tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filling a minimum of 20% of its capacity of neutral anti-humidity grease and to prevent its exit will be supplied properly plugged at both ends | |
| 8 | Rules | ANSI C119.4, ASTM D 566 | |
| 9 | ISO Certificate | 9001 or recent | |
| 10 | Approval certificate | Attach the acceptance certificate DN-DS | |
| 9 | Finish | The joints must be designed with the best quality materials, allowing to fulfill its function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion. The joint must not have cracks, cavities, welds superficial or internal defects, or any other that may affect its proper functioning. | |
| 10 | Main range of driver input | AWG | 4/0 |
| 11 | Output range | AWG | 4/0 |
| 12 | Admissible section | mm² | 107.2 |
| 13 | Approximate length | inch(mm) | 5-1 / 2 (139.7) |
| 14 | Approximate maximum diameter of the sleeve | inch(mm) | 0.564 (14.32) |
| 15 | Approximate minimum diameter of the sleeve | inch(mm) | 0.522 (13.25) |
| 16 | Maximum tension | daN | 2,940 |
| 17 | Color A-B | Pink-Pink | |
| 18 | Identification Mark | Each splice must present the engraving on the body, name of the manufacturer, country of origin, range of driver, tension. | |
| 19 | Packaging | The hose couplings of Pre-insulated compression should be packed in a highly resistant cardboard box in order to protect in the transport and handling of the material |
2
| Specify code and attach technical catalog of the model proposed by the manufacturer | |
| Full pre-siled traction joint for driver No. 2 | |
| Tube or solid bar aluminium alloy | |
| Compressive thermoplastic will be such that it must guarantee the values of the Dielectric strength | |
| The tubular or cylindrical body manufactured in aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they were designed and with a stop inside, filling a minimum of 20% of its capacity of neutral anti-humidity grease and in order to avoid its exit, it will be properly sealed at both ends | |
| ANSI C119.4, ASTM D 566 | |
| The joints must be designed with the best quality materials, allowing to fulfill its function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion. The joint must not have cracks, cavities, welds superficial or internal defects, or any other that may affect its proper functioning. | |
| mm | AAAC 2 AL 2 |
| mm² | 33.62 |
| inch(mm) | 3-15 / 16 (100) |
| inch(mm) | 4/5 (20 |
| daN | 1,100 |
| Red Red | |
| You must present engraving on the body name of the manufacturer, measure of Driver, tension, | |
| The connectors must be packed in a highly resistant cardboard box for your transport, storage and handling |
| 4 | Material name | Full traction joint for driver ACSR-AAAC No. 3/0 AWG | |
| 5 | Splicing standards | ANSI C119.4, ASTM D 566 | |
| 6 | ISO Certificate | 9001 or recent | |
| 7 | Splice class | TO | |
| 8 | Raw material of the driver | Aluminium alloy | |
| 9 | Design of the splice to full traction | The tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filled with inhibitor compound. | |
| 10 | Splice fabrication | The joints must be designed with the materials of the best quality, allowing to fulfill their function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee the resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion. | |
| 11 | Calibers of drivers | mm | ACSR 3/0 |
| 12 | Diameter of the driver | mm | 12.75 |
| 13 | Sleeve length | mm | 380 to 410 |
| 14 | Central diameter of the splice | mm | 36 to 40 |
| 15 | Maximum tension | dAN | 2,940 |
| 16 | Color | Pink- black | |
| 17 | The splice nozzles must present | You must present a stopper on both ends sealant that prevents the entry of moisture and external agents into its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining the inhibiting fat inside the splice during transport and storage | |
| 18 | Identification Mark | You must submit a print on the body of the material name of the manufacturer, measure of conductor, tension, minimum pressure of the press | |
| 19 | Packaging | The hose couplings of Full traction compression should be packed in a highly resistant cardboard box in order to protect in the transport and handling of the material |
| 8 | Rules | ANCI C119.4, IEEE 48-1996 | |
| 9 | Quality certificate | ISO 9001 | |
| 10 | Approval certificate | Attach certificate of acceptance of DN-DS | |
| 11 | Permissible driver 3/0 | AWG | ACSR, AAC, AAAC, CU |
| 12 | Dimension | ||
| 13 | Nominal size of the driver | AWG | No. 3/0 |
| Diameter of driver applying approximate | mm | 11.53 | |
| 14 | Number of Holes | u | 2 |
| 15 | Identification color | Orange | |
| Dimension | |||
| 16 | Diameter of the hole | inch(mm) | 9/16 (14.29) |
| 17 | Distance between holes | inch(mm) | 1-3 / 4 (44.45) |
| 18 | Approximate length (L) | inch(mm) | 3- 1/7 (80) |
| 19 | Width (W) | inch(mm) | Specify |
| 20 | Thickness | inch(mm) | 0.18 (4.57) |
| 21 | Dialing | You must present the mark or symbol of the manufacturer | |
| 22 | Packaging | It should be packed in a box Highly resistant cardboard identified with a label describing the caliber # 2 AWG, manufacturer, quantity, country of origin |
| Product | Tension Clamp 100-150mm Square | ||||||
| Test Items | Test Content | Test Result | |||||
| Sample 1 | Sample 2 | Sample 3 | Sample 4 | Sample 5 | Remarks | ||
| Visual Inspection | Crack | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion: |
| Stoma Trachoma | √ | √ | √ | √ | √ | ||
| Fins | √ | √ | √ | √ | √ | ||
| Burr | √ | √ | √ | √ | √ | ||
| Mechanical Characteristics | Mechanical Load | √ | √ | √ | √ | √ | 1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion: |
| Inspector | Date: 18. June,2010 Approved: | ||||||
| S/N | DETAILS | UNITS | DATA |
| 1. | Type | 100mm2 Compression type mid span joint complete with a tubular aluminium outer extrusion ,steel inner sleeve and two filler plugs | |
| 2. | Material for outer extrusion | Aluminium -99.5% purity | |
| 3. | Material for inner sleeve | HDG steel | |
| 4. | Type of inner sleeve | Tubular, suitable for compression into hexagonal shape | |
| 5. | Suitable for the following ACSR Conductor Size | mm2 | 100 |
| 6. | Resistivity | Less than 75% of the resistivity of an equivalent length of conductor. | |
| 7. | Minimum failing load | kN | 35 |
| 8. | Operating ambient temperature | °C | -1 to 40 |
| 9. | Relative Humidity | % | 85 |
| 10. | Altitude above sea level | m | 1400 |
CLAMP P/G ALUMINIUM/ALUMINIUM 100/100 MM2
| S/N | TYPE | CONDUCTOR CROSS SECTION AREAS (mm2) | NUMBER AND MATERIAL OF BOLT | CLAMP BODY MATERIAL | DIMENSI ONS |
| 1. | Aluminium/Aluminiu m conductor connection | 100/100 | 2 X Galvanised mild steel bolts | Aluminium | As per Drawing No.E11389 shown below |
| Other dimensions | |||||
| 2. | Drawings showing dimensions to be provided with bid | Yes/No | Yes | ||
| 3. | Previous type tests results/certificate to be provided with bid | Yes/No | Yes | ||
| 4. | Quality assurance certificate to be provided with bid | Yes/No | Yes | ||
| 5. | Applicable standard | IEC standards | |||
