- Overview
- Product Description
- Chemical component
- FAQ
Basic Info.
Product Description
Performance Index | Data | |
Product Name | TEHCO CNC Machining Casting Bronze Bearing Bushing With Different Kinds of Oil Grooves for Agriculture and Crane Machine Bushing | |
Material | CuZn25Al5Mn4Fe3/CuSn8P/H59, etc | |
Typical application | Machine-tool, agricultural machinery, crane electromotor, spring pin, steering shaft and transmission, etc. | |
Density g/cm3 | 8.7 | |
Max Dynamic Load N/mm2 | 60 | |
Max Linear Velocity(Grease) m/s | 0.85 | |
Max PV value Grease N/mm2·m/s | 1.65 | |
Pressure strength N/mm2 | >240 | |
Mating Axis | Hardness | ≥40 |
Roughness | 0.4~1.0 | |
Working Temperature ºC | 40~140 | |
Friction Coefficient | 0.09~0.15 | |
coefficient of heat conduction W/m·K | 52 | |
Linear expansion coefficien | 18.5×10-6/K | |
Yield Strength N/mm2 | >100 |
JCB 808/00297 bronze bush, SAE430B cast bush for Excavator, High quality cast bronze bearing
Material | CuZn25Al5 | CuSn5Pb5Zn5 | CuAl10Ni5Fe5 | CuSn12 | CuZn32Al5Ni3 |
Density | 8 | 8.9 | 7.8 | 8.9 | 8 |
HB hardness | >210 | >70 | >150 | >95 | >280 |
Tensile strength N/mm2 | >750 | >200 | >600 | >260 | >540 |
Yeild strength N/mm2 | >450 | >90 | >260 | >150 | >450 |
Elongation % | >12 | >15 | >10 | >8 | >0.3 |
Coefficient of linear expansion | 1.9x10-5/°C | 1.8x10-5/°C | 1.6x10-5/°C | 1.8x10-5/°C | 1.8x10-5/°C |
Max. temp. | -40~+300 | -40~+400 | -40~+400 | -40~+400 | -40~+150 |
Max. load N/mm2 | 100 | 60 | 50 | 70 | 150 |
Max. speed (Dry) m/min | 15 | 10 | 20 | 10 | 15 |
Max. PV N/mm2*m/min (Lubrication) | 200 | 60 | 60 | 80 | 200 |
Compression deformation 300N/mm2 | <0.01mm | <0.05mm | <0.04mm | <0.05mm | <0.005mm |
In the screwdown device of the roughing mill of the medium and heavy plate rolling mill and the hot rolled strip rolling line, the screwdown nut and screw are very important components. During the rolling process, every adjustment of the rolling gap is completed by the screwdown nut and screw, and the huge pressing force is also transmitted to the frame through them. If the screwdown nut and screw fail, it will cause the entire rolling line to stop production.
Pressing down the nut is one of the vulnerable parts on a steel rolling mill, except for the roller. The nuts are generally cast with high-strength bronze or high-strength brass. Therefore, it is necessary to adopt a reasonable structure to ensure that the screwdown device can work well. There are two types of screwdown nut structures: integral and combined.
Pressing down nuts is also applied to electric screw presses, which are forging equipment with strong process applicability. Its structure uses screws and copper nuts as transmission mechanisms, and relies on screw transmission to transform the forward and reverse rotation motion of the flywheel into the reciprocating motion of the slider. It is a forging machinery. During operation, the electric motor accelerates the flywheel rotation to store energy, while pushing the slider downward through screws and copper nuts.
Grade | Chemical composition (mass fraction)(%) | ||||
Cu | Pb | Fe | Zn | other elements | |
C21000 | 94.0-96.0 | 0.03 | 0.05 | margin | - |
C22000 | 89.0-91.0 | 0.05 | 0.05 | margin | - |
C22600 | 86.0-89.0 | 0.05 | 0.05 | margin | - |
C23000 | 84.0-86.0 | 0.05 | 0.05 | margin | - |
C23030 | 83.5-85.5 | 0.05 | 0.05 | margin | Si0.20-0.40 |
C23400 | 81.0-84.0 | 0.05 | 0.05 | margin | - |
C24000 | 78.5-81.5 | 0.05 | 0.05 | margin | - |
C24080 | 78.0-82.0 | 0.20 | - | margin | Al0.1 |
C26000 | 68.5-71.5 | 0.07 | 0.05 | margin | - |
C26130 | 68.5-71.5 | 0.05 | 0.05 | margin | As0.02-0.08 |
C26200 | 67.0-70.0 | 0.07 | 0.05 | margin | - |
C26800 | 64.0-68.5 | 0.15 | 0.05 | margin | - |
C27000 | 63.0-68.5 | 0.10 | 0.07 | margin | - |
C27200 | 62.0-65.0 | 0.07 | 0.07 | margin | - |
C27400 | 61.0-64.0 | 0.10 | 0.05 | margin | - |
C28000 | 59.0-63.0 | 0.30 | 0.07 | margin | - |
C31200 | 87.5-90.5 | 0.7-1.2 | 0.10 | margin | Ni0.25 |
C31400 | 87.5-90.5 | 1.3-2.5 | 0.10 | margin | Ni0.7 |
C31600 | 87.5-90.5 | 1.3-2.5 | 0.10 | margin | Ni0.7-1.2,P0.04-0.10 |
C32000 | 83.5-86.5 | 1.5-2.2 | 0.10 | margin | Ni0.25 |
C33000 | 65.0-68.0 | 0.25-0.7 | 0.07 | margin | - |
C33200 | 65.0-68.0 | 1.5-2.5 | 0.07 | margin | - |
C33500 | 62.0-65.0 | 0.25-0.7 | 0.15 | margin | - |
C34000 | 62.0-65.0 | 0.8-1.5 | 0.15 | margin | - |
C34200 | 62.0-65.0 | 1.5-2.5 | 0.15 | margin | - |
C34500 | 62.0-65.0 | 1.5-2.5 | 0.15 | margin | - |
C35000 | 60.0-63.0 | 0.8-2.0 | 0.15 | margin | - |
C35300 | 60.0-63.0 | 1.5-2.5 | 0.15 | margin | - |
C35330 | 59.5-64.0 | 1.5-3.5 | - | margin | As0.02-0.25 |
C35600 | 60.0-63.0 | 2.0-3.0 | 0.15 | margin | - |
C36000 | 60.0-63.0 | 2.5-3.7 | 0.35 | margin | - |
C36500 | 58.0-61.0 | 0.25-0.7 | 0.15 | margin | Sn0.25 |
C37000 | 59.0-62.0 | 0.8-1.5 | 0.15 | margin | - |
C37100 | 58.0-62.0 | 0.6-1.2 | 0.15 | margin | - |
C37700 | 58.0-61.0 | 1.5-2.5 | 0.30 | margin | - |
C37710 | 56.5-60.0 | 1.0-3.0 | 0.30 | margin | - |
C38000 | 55.0-60.0 | 1.5-2.5 | 0.35 | margin | Sn0.30,Al0.50 |
C38500 | 55.0-59.0 | 2.5-3.5 | 0.35 | margin | - |
We make all kinds of bronze bearing for JCB as follows:
808/00179 | 808/00186 | 808/00216 | 808/00098 | 809/02005 |
808/00398 | 808/00176 | 808/00226 | 808/00201 | 831/10304 |
808/00201 | 808/00136 | 808/00172 | 808/00241 | 334/R4004 |
808/00241 | 808/00229 | 808/00214 | 808/00214 | 831/10181 |
808/00214 | 808/00248 | 808/00266 | 332/W0590 | 232/34604 |
808/00216 | 808/00246 | 808/00307 | 333/C9646 | 332/Z2141 |
400/Z9801 | 808/00265 | 808/00253 | 333/C1495 | 332/Z2129 |
332/G8447 | 808/00364 | 808/00326 | 333/C1462 | 831/10296 |
231/02904 | 808/00385 | 808/00355 | 831/10354 | 831/10002 |
332/W0590 | 808/00383 | 808/00347 | 333/C1505 | 831/10001 |
808/00324 | 808/00382 | 808/00386 | 334/E1901 | 831/10287 |
333/C9646 | 808/00244 | 808/00404 | 334/E1902 | 809/10063 |
333/C1495 | 808/00241 | 831/10211 | 334/R4004 | 808/00391 |
333/C1462 | 808/00237 | 831/10233 | 333/C1505 | 831/10333 |
332/G8447 | 808/00236 | 831/10232 | 809/02001 | 831/10264 |
1.Who are we?
We are based in Shandong, China, start from 2021,sell to North America(20.00%),Eastern Europe(10.00%),Southeast Asia(10.00%),South America(5.00%). There are total about 11-50 people in our office.
2. How do you control the quality?
We have professional inspectors to analyze chemical composition of raw materials and test the finished products strictly according to standard stipulated in the contract. In this process, Internal and external surfaces, two ends appearance, bending degree, fixed length, outer diameter and wall thickness dimension etc will be checked one by one. You can be assured that all the products you get from us are reliable.
3.Can you accept customization?
Yes. If you have special requirements on products or packages, we can do customization for you.
4. Why should you buy from us not from other suppliers?
We are a factory setted up more than 20 years and export more than 15 years. we have ISO 9001 certificate. Professional team to create accurate data.
5.What services can we provide?
Accepted Delivery Terms: FOB,FCA,DDP,DDU; Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,PayPal,Western Union;
Acceptance port of delivery: Tianjin, Qingdao, Guangzhou, Shanghai, etc
Language Spoken:English,Chinese
6.How can we get your price ?
We need below information to quote for you:
Product Name
Standard
Material Grade (Chemical Composition)
Dimension
Quantity
The Drawing for Special Parts