Basic Info.
Technics
Hot-Pressed
Color
Copper
Approved Application
Drinking Water,Heating,Cooling,Compressed Air
Quality Control
100% Inspection
Transport Package
Carton Case with Wooden Plate
Specification
1/2" to 2"
Trademark
MingYuan
Origin
China
HS Code
7412100000
Production Capacity
15000000 PCS/ Year
Product Description
Copper Press Fittings
Applications : Drinking water,heating,cooling,compressed Air and so on ;
Features and benefits :
1. The original copper press joining solution ;
2. Available in sizes 1/2 " to 2 " , including elbows,couplings,tees,reducer, fitting reducer,caps,
3. Customizable with three sealing elements, EPDM, HNBR,FKM
4. leak detection feature identifies un-crimped connections
5. compatible with most common pressing tools and jaws in the market
6. All tubing must comply with the ASTM B88 standard
Operating parameters:
1. Operating pressure: 200PSI CWP max
2. Operating temperature range:-20°F-250°F
Approved applications :
-Potable water
- Hydronic heating
-Chilled water
- Compressed air
-Non-medical gases
-Low pressure steam
Approvals & Certifications :
CUPC , WRAR
Installation Instructions
1. EPDM /Black O ring
2. FPM (DIN ISO 1629)/FKM (ASTM D1418), green O ring
4. HNBR, yellow O ring
Applications : Drinking water,heating,cooling,compressed Air and so on ;
Features and benefits :
1. The original copper press joining solution ;
2. Available in sizes 1/2 " to 2 " , including elbows,couplings,tees,reducer, fitting reducer,caps,
3. Customizable with three sealing elements, EPDM, HNBR,FKM
4. leak detection feature identifies un-crimped connections
5. compatible with most common pressing tools and jaws in the market
6. All tubing must comply with the ASTM B88 standard
Operating parameters:
1. Operating pressure: 200PSI CWP max
2. Operating temperature range:-20°F-250°F
Approved applications :
-Potable water
- Hydronic heating
-Chilled water
- Compressed air
-Non-medical gases
-Low pressure steam
Approvals & Certifications :
CUPC , WRAR
Installation Instructions
- Cut tube square using a tube cutter or fine tooth saw
- Deburr tube ID using a deburring tool
- Deburr tube OD using half round file
- Check fittings bead to ensure seal is present. Do not use any type of oil lubrication
- Mark tube to proper fitting insertion depth( see insertion depth chart below)
1. EPDM /Black O ring
2. FPM (DIN ISO 1629)/FKM (ASTM D1418), green O ring
4. HNBR, yellow O ring
